Courses

All Free Train the Trainer OSHA

OSHA 7500 – Introduction To Safety And Health Management

This course covers the effective implementation of a company’s safety and health management system.  The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element’s proper management.  This course is an interactive training session focusing on class discussion and workshops.  Upon […]

OSHA 511 – Occupational Safety And Health Standards For General Industry

This course covers OSHA Standards, policies, and procedures in general industry.  Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.  Upon course completion students will have the ability to define general industry terms found in the OSHA […]

OSHA 7200 – Bloodborne Pathogens Exposure Control For Healthcare Facilities

This course covers the development and implementation of Exposure Control Plans (ECP) for healthcare facilities.  Course topics include understanding the OSHA Bloodborne Pathogens Standard, determining potential exposure and methods of control, developing an ECP, vaccinations, exposure incidents, training, and record keeping.  The target audience is the program administrator, manager, or other personnel designated with the […]

OSHA 7505 – Introduction To Incident (Accident) Investigation

This course covers an introduction to basic accident investigation procedures and describes accident analysis techniques.  Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six step accident investigation procedure.  The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or […]

OSHA 2264 – Permit-Required Confined Space Entry

This course covers the safety and health hazards associated with permit-required confined space entry.  Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements.  This course features […]

OSHA 3095 – Electrical Standards

This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment.  Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the […]

OSHA 7845 – Recordkeeping Rule Seminar

This course covers OSHA requirements for maintaining and posting records of occupational injuries and illnesses, and reporting specific cases to OSHA.  Upon course completion students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries […]

OSHA 7215 – SILICA IN CONSTRUCTION, MARITIME AND GENERAL INDUSTRIES

This course covers the development and implementation of controls and strategies to prevent or mitigate silica exposures in construction, maritime, and general industries. Course topics include describing the requirements of OSHA’s Respirable Crystalline Silica standards and recognizing the hazards and risks, assessment options, and exposure control measures associated with silica exposure. Contact hours: 7.0 Course […]

OSHA 7115 – Lockout/Tagout

This course covers the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machinery and equipment.  Course topics include types of hazardous energy, detecting hazardous conditions, implementing control measures as they relate to the control […]

OSHA 2045 – Machinery And Machine Guarding Standards

This course covers the various types of common machinery, machine safe guards, and related OSHA regulations and procedures.  Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safe guards.  Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), guarding […]

OSHA 3015 – Excavation, Trenching And Soil Mechanics

This course covers the OSHA Excavation Standard and safety and health aspects of excavation and trenching.  Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems.  Testing […]

OSHA 2225 – Respiratory Protection

This course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program.  Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon […]

OSHA 521 – OSHA Guide To Industrial Hygiene

This course covers industrial hygiene practices and related OSHA regulations and procedures.  Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements.  The course features workshops in health hazard recognition, […]

OSHA 2015 – Hazardous Materials

This course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion […]

OSHA 7210 – Pandemic Influenza And Workplace Preparedness

This course covers recognizing hazards and risks associated with a pandemic influenza event and developing strategies to assist a business,  community, or  family with realistic preparation for a pandemic event.  Course topics include potential impact of a pandemic influenza event on a business and community, critical elements of a preparedness plan, and realistic strategies for […]

OSHA 7225 -Transitioning to Safer Chemicals

Course Description: This course covers a proactive approach to reducing the use of hazardous chemicals in the workplace by furnishing information about, and hands-on experience with the process for transitioning to safer chemicals. Topics include: identification, evaluation, assessment, and implementation of safer chemical alternatives. In particular, participants will use OSHA’s seven-step substitution planning process. The course features workshops […]

OSHA 7120 – Introduction To Combustible Dust Hazards

This course covers the hazards posed by combustible dust within general industry.  Course topics include recognizing the hazards and risks associated with combustible dust, control of electrical installation hazards, and developing controls and strategies to prevent or mitigate combustible dust fires and explosions.  Upon course completion the student will have the ability to utilize strategies […]

OSHA 7400 – Noise In The Construction Industry

This course covers the evaluation and reduction of noise hazards in the construction industry.   Course topics include OSHA Construction Noise Standards, properties of sound, noise-induced hearing loss, noise exposure control, selection and use of hearing protection, conducting sound level surveys, and worker training.  Classroom demonstrations of noise instrumentation and hearing protection devices are featured.  The […]

OSHA 2255 – Principles Of Ergonomics

This course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and transfers in health care. Course […]

OSHA 502 – Update For Construction Industry Outreach Trainers

This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program.  The course provides an update on OSHA Construction Standards, policies, and regulations.  Upon course completion students will have the ability […]

OSHA 7405 – Fall Hazard Awareness For The Construction Industry

This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry.  The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls.  Course topics include identifying, analyzing, and preventing fall hazards utilizing OSHA Fall Protection Standards.  At the conclusion of […]

OSHA 7100 – Introduction To Machinery And Machine Safeguarding

This course covers the process to identify, select and properly safeguard machinery to protect employees and others in the work area and deliver appropriate training in safe work practices.  Course topics include types of machinery requiring guarding, point of operation, emergency eyewash/shower requirements, hazard communication, OSHA Machinery and Machine Guarding Standards violations, and corrective actions. […]

OSHA 3115 – Fall Protection

This course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods.  Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection.  Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction […]

OSHA 500 – Trainer Course In Occupational Safety & Health Standards For The Construction Industry

This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most […]

OSHA 5400 Trainer Course In Occupational Safety And Health Standards For The Maritime Industry

This course is designed for individuals interested in teaching the 10- and 30-hour Maritime safety and health Outreach Training Program to their employees and other interested groups. Special emphasis is placed on those topics required in the 10- and 30-hour Outreach Training Program as well as the most hazardous in the maritime industry using OSHA […]

OSHA 5410 – Occupational Safety And Health Standards For The Maritime Industry

This course covers OSHA policies, procedures, and standards for the maritime industry. Using the OSHA Maritime Standards as a guide, special emphasis is placed on those areas in the maritime industry which are most hazardous.  Upon course completion students will define maritime terms found in the OSHA Maritime Standards, identify hazards in the maritime industry […]

OSHA 503 – Update For General Industry Outreach Trainers

This course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program.  The course provides an update on OSHA General Industry Standards, policies, and regulations.  Upon course completion students will have the […]

OSHA 501 – Trainer Course In Occupational Safety And Health Standards For General Industry

This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those […]

OSHA 510 – Occupational Safety And Health Standards For The Construction Industry

This course covers OSHA Standards, policies, and procedures in the construction industry.  Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous.  Upon course completion students will have the ability to define construction terms found in the OSHA […]

OSHA 2055 – Cranes In Construction

This course covers the best practices in crane and derrick operation using the OSHA Cranes and Derricks in Construction Rule as a guide. This new course will comprehensively address key hazards related to cranes and derricks on construction worksites, including the four main causes of worker death and injury: electrocution, crushed by parts of the […]