BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Mid Atlantic OSHA Training Institute Education Center - ECPv6.17.3//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Mid Atlantic OSHA Training Institute Education Center
X-ORIGINAL-URL:https://www.oshamidatlantic.org
X-WR-CALDESC:Events for Mid Atlantic OSHA Training Institute Education Center
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20280312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20281105T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270301T080000
DTEND;TZID=America/New_York:20270304T160000
DTSTAMP:20261030T181456Z
CREATED:20261030T181443Z
LAST-MODIFIED:20261030T181456Z
UID:10000729-1803888000-1804176000@www.oshamidatlantic.org
SUMMARY:OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-500-pub-2027-008/
LOCATION:Virtual Instructor Led Training\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/AdobeStock_102438225-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270305T080000
DTEND;TZID=America/New_York:20270305T160000
DTSTAMP:20261106T153020Z
CREATED:20261106T153004Z
LAST-MODIFIED:20261106T153020Z
UID:10000779-1804233600-1804262400@www.oshamidatlantic.org
SUMMARY:OSHA 7845 - Recordkeeping Rule Seminar
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7845-pub-2027-005/
LOCATION:Bethlehem\, PA – Northampton Community College\, 3835 Green Pond Road\, Bethlehem\, PA\, 18020\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/record-keeping.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270305T080000
DTEND;TZID=America/New_York:20270305T160000
DTSTAMP:20261106T164646Z
CREATED:20261106T164630Z
LAST-MODIFIED:20261106T164646Z
UID:10000809-1804233600-1804262400@www.oshamidatlantic.org
SUMMARY:OSHA 7115 - Lockout/Tagout
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7115-pub-2027-002/
LOCATION:Butler\, PA\, Public Safety Building\, 107 College Drive\, Butler\, PA\, 16002\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/Lock-tag-hasp-03.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270310T160000
DTSTAMP:20261106T182435Z
CREATED:20261106T182419Z
LAST-MODIFIED:20261106T182435Z
UID:10000843-1804492800-1804694400@www.oshamidatlantic.org
SUMMARY:OSHA 7205 - Health Hazard Awareness
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7205-pub-2027-001/
LOCATION:York\, PA\, 3405 Board Road Suite 100\, York\, PA\, 17406\, United States
ATTACH;FMTTYPE=image/png:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/health-hazard-awareness-job-risk-222.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270311T160000
DTSTAMP:20261008T203249Z
CREATED:20261008T203239Z
LAST-MODIFIED:20261008T203249Z
UID:10000675-1804492800-1804780800@www.oshamidatlantic.org
SUMMARY:OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-501-pub-2027-002/
LOCATION:Baltimore\, MD – Chesapeake Region Safety Council\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-workers-22.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270311T160000
DTSTAMP:20261009T132545Z
CREATED:20261009T132534Z
LAST-MODIFIED:20261009T132545Z
UID:10000677-1804492800-1804780800@www.oshamidatlantic.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-510-pub-2027-008/
LOCATION:Richmond\, VA\, 1600 East Parham Road\, Richmond\, VA\, 23228\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270311T160000
DTSTAMP:20261106T154145Z
CREATED:20261106T154130Z
LAST-MODIFIED:20261106T154145Z
UID:10000785-1804492800-1804780800@www.oshamidatlantic.org
SUMMARY:OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-501-pub-2027-004/
LOCATION:Bethlehem\, PA – Northampton Community College\, 3835 Green Pond Road\, Bethlehem\, PA\, 18020\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-workers-22.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270311T160000
DTSTAMP:20261106T155518Z
CREATED:20261106T155459Z
LAST-MODIFIED:20261106T155518Z
UID:10000797-1804492800-1804780800@www.oshamidatlantic.org
SUMMARY:OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-500-pub-2027-012/
LOCATION:East Norriton\, PA\, 430 West Germantown Pike\, East Norriton\, PA\, 19403\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/AdobeStock_102438225-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270312T080000
DTEND;TZID=America/New_York:20270312T160000
DTSTAMP:20261106T181803Z
CREATED:20261106T181743Z
LAST-MODIFIED:20261106T181803Z
UID:10000839-1804838400-1804867200@www.oshamidatlantic.org
SUMMARY:OSHA 7100 - Introduction to Machinery and Machine Safeguarding
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7100-pub-2027-002/
LOCATION:Nanticoke\, PA\, 1333 S Prospect St\, Nanticoke\, PA\, 18634\, United States
ATTACH;FMTTYPE=image/png:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/OSHA7100.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270312T080000
DTEND;TZID=America/New_York:20270312T163000
DTSTAMP:20261106T181402Z
CREATED:20261106T181347Z
LAST-MODIFIED:20261106T181402Z
UID:10000835-1804838400-1804869000@www.oshamidatlantic.org
SUMMARY:OSHA 7235 - Introduction to Respiratory Protection
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7235-pub-2027-002/
LOCATION:Harrisburg\, PA\, 1 HACC Dr\, Harrisburg\, PA\, 17110\, United States
ATTACH;FMTTYPE=image/png:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/OSHA7300.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270315T080000
DTEND;TZID=America/New_York:20270317T160000
DTSTAMP:20261009T134216Z
CREATED:20261009T134205Z
LAST-MODIFIED:20261009T134216Z
UID:10000679-1805097600-1805299200@www.oshamidatlantic.org
SUMMARY:OSHA 3115 - Fall Protection
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-3115-pub-2027-002/
LOCATION:Roanoke\, VA\, 108 N Jefferson St Ste 201-C\, Roanoke\, VA\, 24016\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/fall-hazard-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270316T080000
DTEND;TZID=America/New_York:20270319T160000
DTSTAMP:20261103T211627Z
CREATED:20261103T211611Z
LAST-MODIFIED:20261103T211627Z
UID:10000753-1805184000-1805472000@www.oshamidatlantic.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-510-pub-2027-016/
LOCATION:Baltimore\, MD – Chesapeake Region Safety Council\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270317T080000
DTEND;TZID=America/New_York:20270319T160000
DTSTAMP:20261106T162011Z
CREATED:20261106T161952Z
LAST-MODIFIED:20261106T162011Z
UID:10000807-1805270400-1805472000@www.oshamidatlantic.org
SUMMARY:OSHA 503 - Update for General Industry Outreach Trainers
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-503-pub-2027-004/
LOCATION:Ocean City\, MD\, 300 Seabay Lane\, Ocean City\, MD\, 21842\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270319T080000
DTEND;TZID=America/New_York:20270319T160000
DTSTAMP:20261106T171613Z
CREATED:20261106T171555Z
LAST-MODIFIED:20261106T171613Z
UID:10000821-1805443200-1805472000@www.oshamidatlantic.org
SUMMARY:OSHA 7005 - Public Warehousing and Storage
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7005-pub-2027-001/
LOCATION:Butler\, PA\, Public Safety Building\, 107 College Drive\, Butler\, PA\, 16002\, United States
ATTACH;FMTTYPE=image/png:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/OSHA7005_FREE.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270319T080000
DTEND;TZID=America/New_York:20270319T163000
DTSTAMP:20260807T170814Z
CREATED:20260807T170808Z
LAST-MODIFIED:20260807T170814Z
UID:10000591-1805443200-1805473800@www.oshamidatlantic.org
SUMMARY:OSHA 7210 - Pandemic Illness Preparedness
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7210-pub-2027-001/
LOCATION:Virtual Instructor Led Training\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2020/09/cv-19-300x282-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270319T080000
DTEND;TZID=America/New_York:20270319T163000
DTSTAMP:20261106T174956Z
CREATED:20261106T173356Z
LAST-MODIFIED:20261106T174956Z
UID:10000831-1805443200-1805473800@www.oshamidatlantic.org
SUMMARY:OSHA 7505 - Introduction to Incident [Accident] Investigation
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7505-pub-2027-003/
LOCATION:East Norriton\, PA\, 430 West Germantown Pike\, East Norriton\, PA\, 19403\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/incident-investigation.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270322T080000
DTEND;TZID=America/New_York:20270324T160000
DTSTAMP:20261103T212829Z
CREATED:20261103T212814Z
LAST-MODIFIED:20261103T212829Z
UID:10000755-1805702400-1805904000@www.oshamidatlantic.org
SUMMARY:OSHA 3085 - Principles of Scaffolding
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-3085-pub-2027-001/
LOCATION:Baltimore\, MD – Chesapeake Region Safety Council\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2020/07/scaffold-cool-angle-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270322T080000
DTEND;TZID=America/New_York:20270324T160000
DTSTAMP:20261106T152154Z
CREATED:20261106T152134Z
LAST-MODIFIED:20261106T152154Z
UID:10000777-1805702400-1805904000@www.oshamidatlantic.org
SUMMARY:OSHA 502 - Update for Construction Industry Outreach Trainers
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-502-pub-2027-010/
LOCATION:Ocean City\, MD\, 300 Seabay Lane\, Ocean City\, MD\, 21842\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2020/12/April-Portal-Pic.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270405T080000
DTEND;TZID=America/New_York:20270408T160000
DTSTAMP:20260806T201231Z
CREATED:20260806T201226Z
LAST-MODIFIED:20260806T201231Z
UID:10000581-1806912000-1807200000@www.oshamidatlantic.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-510-pub-2027-005/
LOCATION:Virtual Instructor Led Training\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270405T080000
DTEND;TZID=America/New_York:20270408T160000
DTSTAMP:20261021T182630Z
CREATED:20261021T182601Z
LAST-MODIFIED:20261021T182630Z
UID:10000715-1806912000-1807200000@www.oshamidatlantic.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-510-pub-2027-011/
LOCATION:Roanoke\, VA\, 108 N Jefferson St Ste 201-C\, Roanoke\, VA\, 24016\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270406T080000
DTEND;TZID=America/New_York:20270408T160000
DTSTAMP:20261106T184941Z
CREATED:20261106T184924Z
LAST-MODIFIED:20261106T184941Z
UID:10000851-1806998400-1807200000@www.oshamidatlantic.org
SUMMARY:OSHA 3015 - Excavation\, Trenching\, and Soil Mechanics
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-3015-pub-2027-004/
LOCATION:East Norriton\, PA\, 430 West Germantown Pike\, East Norriton\, PA\, 19403\, United States
ATTACH;FMTTYPE=image/png:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/OSHA7410.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270412T080000
DTEND;TZID=America/New_York:20270414T160000
DTSTAMP:20261009T141658Z
CREATED:20261009T141648Z
LAST-MODIFIED:20261009T141658Z
UID:10000681-1807516800-1807718400@www.oshamidatlantic.org
SUMMARY:OSHA 3015 - Excavation\, Trenching\, and Soil Mechanics
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-3015-pub-2027-001/
LOCATION:Richmond\, VA\, 1600 East Parham Road\, Richmond\, VA\, 23228\, United States
ATTACH;FMTTYPE=image/png:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/OSHA7410.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270412T080000
DTEND;TZID=America/New_York:20270415T160000
DTSTAMP:20261106T145054Z
CREATED:20261106T145037Z
LAST-MODIFIED:20261106T145054Z
UID:10000763-1807516800-1807804800@www.oshamidatlantic.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-510-pub-2027-020/
LOCATION:Baltimore\, MD – Chesapeake Region Safety Council\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270412T080000
DTEND;TZID=America/New_York:20270415T160000
DTSTAMP:20261106T151416Z
CREATED:20261106T151358Z
LAST-MODIFIED:20261106T151416Z
UID:10000769-1807516800-1807804800@www.oshamidatlantic.org
SUMMARY:OSHA 511 - Occupational Safety and Health Standards for General Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-511-pub-2027-010/
LOCATION:East Norriton\, PA\, 430 West Germantown Pike\, East Norriton\, PA\, 19403\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/gears-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270412T080000
DTEND;TZID=America/New_York:20270415T160000
DTSTAMP:20261106T154644Z
CREATED:20261106T154626Z
LAST-MODIFIED:20261106T154644Z
UID:10000789-1807516800-1807804800@www.oshamidatlantic.org
SUMMARY:OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-501-pub-2027-006/
LOCATION:York\, PA\, 3405 Board Road Suite 100\, York\, PA\, 17406\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-workers-22.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270412T080000
DTEND;TZID=America/New_York:20270415T160000
DTSTAMP:20261106T154846Z
CREATED:20261106T154830Z
LAST-MODIFIED:20261106T154846Z
UID:10000791-1807516800-1807804800@www.oshamidatlantic.org
SUMMARY:OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-500-pub-2027-009/
LOCATION:Bethlehem\, PA – Northampton Community College\, 3835 Green Pond Road\, Bethlehem\, PA\, 18020\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/AdobeStock_102438225-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270416T080000
DTEND;TZID=America/New_York:20270416T160000
DTSTAMP:20261106T171809Z
CREATED:20261106T171750Z
LAST-MODIFIED:20261106T171809Z
UID:10000823-1807862400-1807891200@www.oshamidatlantic.org
SUMMARY:OSHA 7100 - Introduction to Machinery and Machine Safeguarding
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-7100-pub-2027-001/
LOCATION:Butler\, PA\, Public Safety Building\, 107 College Drive\, Butler\, PA\, 16002\, United States
ATTACH;FMTTYPE=image/png:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/OSHA7100.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270419T080000
DTEND;TZID=America/New_York:20270421T160000
DTSTAMP:20260807T171110Z
CREATED:20260807T171105Z
LAST-MODIFIED:20260807T171110Z
UID:10000593-1808121600-1808323200@www.oshamidatlantic.org
SUMMARY:OSHA 502 - Update for Construction Industry Outreach Trainers
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-502-pub-2027-003/
LOCATION:Virtual Instructor Led Training\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2020/12/April-Portal-Pic.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270419T080000
DTEND;TZID=America/New_York:20270421T160000
DTSTAMP:20261106T172430Z
CREATED:20261106T172413Z
LAST-MODIFIED:20261106T172430Z
UID:10000827-1808121600-1808323200@www.oshamidatlantic.org
SUMMARY:OSHA 2264 - Permit-Required Confined Space Entry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-2264-pub-2027-006/
LOCATION:Dulles\, VA\, 42680 Trade West Dr\, Dulles\, VA\, 20166\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/confined-space-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270419T080000
DTEND;TZID=America/New_York:20270422T160000
DTSTAMP:20261106T144434Z
CREATED:20261106T144419Z
LAST-MODIFIED:20261106T144434Z
UID:10000759-1808121600-1808409600@www.oshamidatlantic.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide\, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program\, to conduct both 10- and 30-hour General Industry Outreach classes\, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. \nTopics include: \n\nOSH Act\, and OSHA Standards\nRecordkeeping\nWalking & Working Surfaces\nMeans of Egress & Fire Protection\nPersonal Protective Equipment\nLockout / Tagout\nWelding\, Cutting & Brazing\nElectrical Standards & Work Practices\nHazard Communication\nConfined Space\nSafety & Health Problems\nHand & Power Tools\nOutreach Training Program Requirements\nTraining Techniques\n\nCourse Includes: \n\nStudent binder\nOSHA CFR 1910\nElectronic Resources including:\n\nPowerPoint Presentation\nVideo clips\nTest Questions\nAdditional resource information\n\n\nLunch and refreshments for in-person classes
URL:https://www.oshamidatlantic.org/class/osha-510-pub-2027-018/
LOCATION:East Norriton\, PA\, 430 West Germantown Pike\, East Norriton\, PA\, 19403\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.oshamidatlantic.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
END:VCALENDAR